CEO메세지 | 연혁 | 오시는길Messring | HuDe | Optronics | Capacitec | Falcon | TecSA | SECsas실체현미경 | 다목적줌현미경 | 산업용현미경 | 측정기기 | 비접촉3차원측정기기 | 생물현미경 | 카메라&이미지S/W | 액세사리고객게시판
HOME > Autimotive > Messring
Data Acquisition(Messring Catalouge 2009)
M=BUS InDummy
Logger 3C.6C_4AD-A21-2_VD_E.pdf
Messring Catalouge 2009_E.pdf
Logger 3C/6C
  • 3 or 6 channel data acquisition
  • Complete signal conditioning
  • Transducer Electronic Data Sheet (TEDS)
  • Ruggedized plastic molding
  • Separate PCB for sensor connections
  • Backup system with external accumulator
  • Stand-alone operation
  • 16bit resolution
  • 20kHz sampling rate
  • 17s recording time per channel
  • Extended self test functions included
  • 40×25x14mm
  • Weight of 15 grams

    For in-dummy application designed 3 or 6 channel miniature data acquisition module with full signal conditioning, data recorder and backup system for data loss prevention in a ruggedized plastic molding.

    M=BUS InDummy
    Hybrid III 3 years
    Hybrid III 6years
    Hybrid III 5th percentile
    Hybrid III 50th percentiles
    Hybrid III 95th percentile
    Side Impact ES2
    SIDⅡs
    BioRIDⅡ
    Child Dummy Q1.5
    Child Dummy Q3
    Child Dummy Q6
  • M=BUS Pedestrian Safety
    Flex GTR Leg Impactor
  • Free motion (cable detached during head launch)
  • Installation of up to 4 M=BUS Loggers
  • Maximum support of 24 channels
  • Available as upgrade kit
  • Pedestrian Head Impactors
  • Free motion (cable detached during head launch)
  • Installation of up to 4 M=BUS Loggers
  • Maximum support of 24 channels
  • Available as upgrade kit
  • EEVC Leg Impactor
  • Free motion (cable detached during head launch)
  • Installation of one M=BUS Logger
  • Maximum support of 6 channels
  • EEVC Upper Leg Impactor
  • Guided motion (with feed line)
  • Installation of one M=BUS Logger
  • Second Logger connected to charge amplifier
  • Free Motion Head Form
  • According to 49 CFR Part 572 without modifications
  • Free motion (cable detached during head launch)
  • Installation of up to 2 M=BUS Loggers
  • Maximum support of 12 channels
  • Easy to install
  • M=BUS Pro Onboard
    Analog DAS_4AD-A61-1_VD_E.pdf
    DAS Rack_4AD-A69-1_VD_E.pdf
    Digital DAS_4AD-A62-1_VD_E.pdf
    Fire and Measurement Box_4AD-A63-1_VD_E.pdf
    M=BUS Pro ICP_4AD-A65_VD_E.pdf
    Analog DAS
  • Complete signal conditioning
  • Simple side by side mounting rail
  • Backup system with internal battery
  • 16 bit resolution
  • 20 kHz sampling rate (max. 100 kHz)
  • 3 hours recording time with 8 channels
  • High voltage / sense input
  • Internal shunt resistors
  • Internal bridge completion
  • Bridge current measurement
  • Weight < 185 grams
  • The M=BUS Pro DAS 8C-4GB shows the next step in miniaturization of data acquisition electronics.
    This M=BUS unit is designed to acquire data from any resistive transducer connected over LEMO connectors.
    The analog frontend is programmable to adapt the full range of existing sensors and is specially protected against over voltage and short circuits.

    A simple mounting rail can be used to place the devices of the M=BUS DAS family side by side on a central position e.g. in the trunk of a car.
    The DAS 8C-4GB can also be placed decentralized inside a test object with the advanced one-wire concept of the M=BUS in a daisy chain manner which leads to an enormous reduction of cabling.

    For the highest level of data security the DAS 8C-4GB is equipped with a backup system that is activated automatically in case of cable break.
    Digital DAS
  • 16 channel data acquisition unit
  • 16 digital input channels (0..15V)
  • 2 channels per LEMO 1B connectors
  • 8 x 12V auxiliary voltage
  • T0 on each channel
  • Programmable Pullup/Pulldown Resistors
  • Simple side by side mounting rail
  • Backup system with internal battery
  • Stand-alone operation
  • Upto 1000kHz sampling rate
  • Inputs with overvoltage protection ± 48V
  • Size 80×38x30 mm
  • Weight < 200 grams
  • The M=BUS Pro digital DAS 16C-4GB shows the next step in miniaturization of data acquisition electronics. This M=BUS unit is designed to acquire digital events like trigger or contact switches. The 16 channels are paired in 8 groups.
    On each 1B LEMO connector an isolated auxiliary voltage of 12V is provided. To acquire events very accurately the sampling rate can be programmed up to 1MHz.

    A digital switching threshold can be programmed for each channel individually with in the complete input range of 0…15V. The DAS 16C-4GB can also acquire unipolar analog signals with a resolution of 16Bit.

    A simple mounting rail can be used to place the devices of the M=BUS DAS family side by side on a central position e.g. in the trunk of a car.
    The DAS 16C-4GB can also be placed decentralized inside a test object with the advanced one-wire concept of the M=BUS in a daisy chain manner which leads to an enormous reduction of cabling.
    Fire and Measurement Box
  • 8 Channel Fire and Measure Unit
  • 8 individual programmable timer for igniting Airbags or Pretensioners, etc.
  • Delays from 0.05ms to 65s
  • Recording of Voltage and Current at 500KHz
  • DC or AC Ignition Modes
  • Lightweight magnesium alloy case
  • Simple side by side mounting rail
  • Backup system with internal battery
  • Stand-alone operation
  • Size 80×76x30 mm
  • Weight < 350 grams
  • The M=BUSPro DAS 8C-4GB shows the next step in miniaturization of data acquisition electronics.
    This M=BUS unit is designed to acquire data from any resistive transducer connected over LEMO connectors.
    The analog frontend is programmable to adapt the full range of existing sensors and is specially protected against over voltage and short circuits.

    A simple mounting rail can be used to place the devices of the M=BUS DAS family side by side on a central position e.g. in the trunk of a car.
    The Fire and Measurement Box 8C can also be placed decentralized inside a test object.

    For the highest level of data security the Fire and Measurement Box 8C is equipped with a backup system that is activated automatically in case of cable break.
    This feature provides also the option to perform tests in stand-alone configuration of the test object without bus supply.
    DAS Rack
  • Fixation of up to 14 modules
  • Simple rail mounting with one screw
  • Units self adjusting
  • Access to single units from top without removing other modules
  • Lateral slide stops
  • Customizable configurations (13mm catch)
  • Lightweight
  • The DAS Rack brings the M=BUSPro OnBoard System in a proper form. Up to 14 modules can be fixed within the rail mount in a compact DAS line.
    All available M=BUSPro OnBoard DAS device are compatible to this bracket. Be free in configuring your system.
    Shorten the rails to the required length and save spaces by mounting the racks directly back to back. The M=BUSPro OnBoard DAS supports all your needs
    M=BUS Pro ICP
  • 8 channels for piezoelectric sensors
  • ICP signal conditioning
  • Backup system with internal battery
  • 16 bit resolution
  • 100 kHz sampling rate
  • 3 hours recording time with 8 channels
  • Weight < 185 grams
  • The M=BUSPro ICP 8C-4GB shows the next step in miniaturization of data acquisition electronics.
    This M=BUS unit is designed to acquire data from any piezoelectric transducer with ICP interface.
    The ICP Sensors are connected via BNC or SMA connectors.

    A simple mounting rail can be used to place the devices of the M=BUS ICP family side by side on a central position e.g. in the trunk of a car.
    The ICP 8C-4GB can also be placed decentralized inside a test object with the advanced one-wire concept of the M=BUS in a daisy chain manner which leads to an enormous reduction of cabling.
    For the highest level of data security the ICP 8C-4GB is equipped with a backup system that is activated automatically in case of cable break.
    To meet the demands of special test conditions the ICP 8C-4GB contains an extraordinary huge data memory of 4GByte.
    This non volatile memory is implemented in Flash-Technology and allows a recording duration of more than 3 hours with 8 channels at 20 KHz.
    M=BUS Peripherals
    3C Interface Acceleration_4GB-A31_VD_E.pdf
    6C Interface Acceleration and ARS_4GB-C61_VD_E.pdf
    CrashLink Converter_4AD-C5_VD_E.pdf
    Dual Axis Inclinometer_4AD-A51-1_VD_E.pdf
    Ethernet Gateway_4AD-B31_VD_E.pdf
    External Battery high Capacity_4AZ-A2_VD_E.pdf
    External Battery_4AZ-A1_VD_E.pdf
    NA33 Gateway_4AD-B21_VD_E.pdf
    Status Display_4AD-C41_VD_E.pdf
    Terminator_4AD-C11-1_VD_E.pdf
    USB Gateway_4AD-B11_VD_E.pdf
    Ethernet Gateway USB Gateway NA33 Gateway Terminator
    Dual Axis Inclinometer 3C Interface-
    Acceleration
    6C Interface-
    Acceleration and ARS
    Status Display
    CrashLink Converter 1. External Battery
    2. External Battery - High Capacity
    DAS Accessories
    Toolbox_4AD-C31_VD_E.pdf
    Tool box
    All you need for quick and easy cable preparation for M=BUS installations, together with a starter set of cables, connectors and adaptors.
  • Complete Tool Set for M=BUS cable preparation and connector crimping
  • Equipment for wiring (connectors, cables, cable adaptors)
  • Practical tool case
    The M=BUS system is customizable to a wide range of applications in the field of impact testing. To grow with the demands of more complex configurations the system wiring has to be extended. The M=BUS Tool Box contains a set of essential utilities for an easy and quick system maintenance and for the creation of custom-made arrangements. It consists of useful Tools for cable preparation and connector crimping and provides a starter set of Enviroflex coax cables, MMCX connecters and adaptors.
  • Cables & Connectors
    Cables and connectors for MESSRING’s innovative bus solution M=BUS using single 2.5 mm coax cable for daisy chaining up to 32 devices.
  • Digital system
  • One wire bus
  • Daisy chain wiring
  • Snap-in connectors for easy coupling
  • Highly flexible 2.5mm coax cable
    M=BUS is wired with a set of coax cables (2.5mm/0.1”) and connectors in a daisy-chain manner and is easily customizable to the needed application..
  • ATD Service Chair
  • One chair for all types of frontal and side impact dummy
  • Robust design with aluminium profile technology
  • Proper dummy storage and better handling due to easy-lift ratchet system
  • Easy access to the upper torso due to the single post construction
  • Practical racks for tools and components (optional tool holder)
  • Large working plate
  • Easier service and maintenance
  • afety against overturning (low CoG)
  • Fixing brake at each caster
  • NA33
    CAN-Bus-Logger_4AB-Q1_VD_E.pdf
    FAM Adapter_4AB-L1_VD_E.pdf
    Isolation Amplifier_4AB-K1_VD_E.pdf
    NA33_4AB_VD_E.pdf
    NA33 Data Acquisition System & Extensions
    NA33 is the MESSRING product code for an onboard transient recorder. Onboard means, the system is designed to withstand high acceleration, appearing during e.g. crash tests in cars.
    It is designed to work with strain-gauge and piezo-resistive sensors. Digital signals can be recorded and airbags can be ignited at a desired moment.

    The System consists of the following components:
  • Housing with backplane
  • small: accepting 5 analog/digital boards/hub
  • large: accepting 12 analog/digital boards/hub
  • Chargeable battery pack
  • Power board with DC/DC converter
  • Controller
  • Analog boards
  • Digital boards
  • Network hub
  • CAN-Bus-Logger
    To an increasing extent, modern passive and active vehicle safety systems are triggered via vehicle bus systems (CAN-Bus, LIN-Bus).
    FAM Adapter
    Firing and measurement adapter for NA33 Data Acquisition.
    Isolation Amplifier
    The isolation amplifier serves to measure voltages with the NA33 data acquisition system.
    NA34
    NA34_4AC-A_VD_E.pdf
    NA34

    Compact onboard data acquisition and storage system with the following features:
  • 6 or 12 analog inputs
  • 4 digital inputs
  • 2 digital outputs (e.g. to fire airbags)
  • Memory 2 MB per 12 channels
  • One individual ADC per channel
  • 16 bit resolution
  • Antialiasing filter, Bessel 5-pole 10 kHz 3 dB
  • Sensor supply voltage ±2.5V/±5V programmable, short circuit protected
  • Input voltage up to ±5V (overvoltage protection up to ±40 V)
  • Offset correction ±3V
  • Gain range 1…10,000 programmable for each single channel in steps <1
  • Sampling rate max. 100kSamp/s per channel on all channels simultaneously
  • Recording time 4.3 sec per channel at 20 kSamps/s
  • Data transfer by Ethernet 10 Mbyte/s 10 Base-T twisted pair TCP/IP protocol
  • ID-Module Support (Endevco, MSC, Dallas)
  • 100% Conformity to SAE J211
  • Power and battery charge management
  • Power supply voltage 18..22 VDC
  • Dimensions: 276mm × 170mm × 40mm (W × H × D)
  • Software CrashSoft 3 DAS-CONTROL NA34